Subscribe to Home & Garden Decoration Ideas

In case you’ve purchased a smart door lock, then you surely want to know how to install it. Luckily, the installation is quite easy and you don’t have to require the help of the professionals. Therefore, with the help of this article, you will be able to change your old door lock and replace it with the new smart door lock in a very short time. Here are 5 easy steps that will help you install any smart door lock without too many troubles.

Remove the Existing Deadbolt

This is the first thing you have to do if you want to replace your door lock. So prepare yourself and choose a drill or a screwdriver that will help you remove the existing deadbolt. In order to do this, you have to remove all the screws used for installing it in the first place.

Make Sure the Latch Fits the Diameter

The next thing you have to do is to measure the diameter of the hole and then to find the latch that fits the diameter. After you make sure that the position and the length of the latch is the right one, you have to place the latch into the door, grab a screwdriver and fix it with some screws.

Install the Smart Door Lock

In order to install the smart door lock, you have to measure the thickness of the door so you can determine the length of the screws. After you place the smart door lock in its place, you have to slide the deadbolt steam through the latch that you’ve already fixed. Then, gently slide the wires under the latch while keeping the deadbolt tight against the door. After that, all you have to do is to place the bracket on the other side of the door and slide the wires through it in order to fix the bracket with the bolts.

Install the Panel

This may be a little more difficult, so you need to be careful when you install the interior half of the lock. Before you start this operation, make sure that the battery cover is removed and start plugging the cables into their right electrical components. Afterward, insert them into the interior piece and fix it with the screws. In order to program the smart door key, you have to cover back the batteries and to check if the deadbolt is working without any problems.

Program the Smart Lock

This is the final step you have to take in order to finish the installation, so after you download the apps available for your smart lock, calibrate the smartphone and the deadbolt and you will be ready to use it.